MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

 


 

 

MrStitch ®   mr scissors.gif (17471 bytes)Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location 77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8899
Contact Us By E-MAIL mrstitch@mrstitch.com
 

Call or Email  For your  Estimate or Appointment to help you!

Headliners and Convt.gif (4898 bytes)

credit-cards.gif (3612 bytes)
 

Mazda

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

 

GET YOUR MAZDA MIATA TOP AND WINDOW REPLACED
MrStitch Miata Top Svc
Mazda.gif (1149 bytes)
MrStitch Installation Pictures for MAZDA MIATA

1990-97  models GLASS WINDOW conversions
MX5 Plastic Window Tops Replacements / Roll Bar Windscreens

Click on Pictures for full size screen!


DOES YOUR Miata TOP LOOK LIKE THIS? 
with the old plastic rear window that came stock
MiataRearOld1.JPG (218917 bytes) MazdaMiata01.jpg (29351 bytes) Mazda Miata 97 old top plastic window.JPG (3283891 bytes)
Sun Burned and Torn open rear window?

Before old Plastic Window Mazda Miata 97 old top plastic window 0.JPG (1702189 bytes) After with New Glass Mazda 97top new glass.jpg (3184506 bytes)


Does your top have a loose look on the door windows? and water drips on you when raining!

You need Side Cables! Part# CA140 made by M&T Manufacturing
MazdaMiata side cables 0.jpg (3317042 bytes) MazdaMiata side cables.jpg (2758650 bytes) Mazda top old cables_1.jpg (389640 bytes) Mazda top new cables_1.jpg (387053 bytes)


MrStitch new  WindScreen design! 8/10/12  Mazda Miata Seat WindScreens
Slips over seats and attaches with elastic straps

 



Mazda Roll Bar Mesh WindScreens made See our style!

See the
06 Mazda MX-5 in Burgandy Wine with  Rollbar Custom  WindScreen
made from patterns for customer
Mr.Lilley


Mazda MX-5 Roll Bar Windscreen for Mr.Robinson



  we can save your old rain rail, but it can look like this
split at the bottom, lets water and dirt into your side Drain holes you cannot see!

Then mildew starts and your car has that sour smell of bacteria
 

  Miata Rain Rail Old 01.JPG (2658050 bytes)   Miata Rain Rail Old 00.JPG (2005404 bytes)  Miata Drain hole Clog 00.JPG (2268598 bytes)

we remove  the top frame and installed a new CONVERTIBLE TOP ASSEMBLY

MazdaMiata03.jpg (41345 bytes)     MazdaMiata07.jpg (43690 bytes)     MazdaMiata08.jpg (44469 bytes)     MazdaMiata09.jpg (42373 bytes)

this can be a glass rear window or a OEM replacement that uses a plastic window UV DOT

We can save your old rear Rain Rail if you do not mind using the old seal.

If you want to keep your car from leaking!  Buy the new RAIN RAIL and add to the new top kit!


See our Mazda Miata Tops with Glass Rear Window Conversions

MazdaMiata04.jpg (46088 bytes)   MazdaMiata05.jpg (38671 bytes)   MazdaMiata06.jpg (39684 bytes)

 
1997 MX5 Robbins Top #2919C SF TAB
Tinted Glass, No Deck Seams, with Rain Rail, Matching Cloth Binding


Miata MX5 Robbins Glass Top 01.jpg (640317 bytes)

For William Morgan owner 97 Mazda MX5

from www.mossmotors.com


See the New Robbins Top Assembly installed for
Johnson Co. Customer
  1990 Miata

J.BlochMiata02.JPG (240535 bytes)    J.BlochMiata01.JPG (157720 bytes)

Robbins Mazda Miata Plastic Window top  91 model with strap mods installed 8/28/08
see the new updated robbins miata top with the new style soft rubber rainrail and top frame reinforcements
Mazda 91Top Plastic Window 00.jpg (3140371 bytes)   
Mazda 91Top Plastic Window 01.jpg (2920696 bytes) 
 
1991 Mazda Miata Replacement top with plastic window
oldMiata 1991 PlasticTop Stollman 0.JPG (3064160 bytes) newMiata 1991 PlasticTop Stollman 01.JPG (3938505 bytes) Miata 1991 PlasticTop Stollman 02.jpg (2958742 bytes)

Miata 1991 ClogDrains Stollman 0.JPG (2225518 bytes) Miata 1991 ClearDrains Stollman 0.JPG (2241706 bytes) Miata 1991 RustRails Stollman 0.JPG (1792656 bytes) Miata 1991 RustRail Stollman 00.JPG (2579964 bytes) Miata 1991 Painted Rails Stollman 0.JPG (1741775 bytes) Miata 1991 Painted Rails Stollman 00.JPG (2190017 bytes)
See the drain holes cleared and the rusty Rain Rail Retainer(3) painted
this top needed a serious update with these mods, the top will be sealed now with the stud seals also installed.
EZ-ON top from Topsonline for Michael Stollman
 



See the Lady strap mod to help customers that cannot close new EZon glass tops !
When the weather is not over 72 degrees the top is hard to pull forward with the new premium glass and top materials. We made the top easy to close with this simple mod to rear straps
 
see Dee Dee Samos with new Mazda Top WH758-BLKB-CB 89 to 2005 with the loose rear glass
She had top installed by another shop and the top would not close or latch! with one person.
EZon sent new replacement new Updated top assembly to make the customer happy!
EZon Cloth Miata Top  

You can find your Mazda Miata Top with Plastic or Glass rear Windows with Rain Rail Assembly at these Web sites
 
WE HAVE INSTALLED MANY TOPS FROM These Companys
www.robbinsautotopco.com
www.topsonline.com
www.worlduph.com
www.gahh.com
www.jcwhitney.com
www.richandfamousautotops.com
www.ezonauto.com
www.GoMiata.com

Get Your Mazda Miata Accessories and Catalog at
www.mmmiata.com
Call for a free key chain! 1-800-MM-MIATA
 




 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

 


 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

 


 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

 

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2020 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020




 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2020


MrStitch installs a Original Upholstery kit to be just like back in the Day!

for Z/28 CAMARO OWNERS ONLY!

The mrstitch Z/28 interior stood toe to toe with with to best interiors shown at many car shows!
See mrstitch at the 2008 Palo Alto Concours D`Elegance at Stanford
MrStitch Concours show 2008 00.JPG (2538518 bytes)

New!   MrStitch Z/28 OEM Upholstery Kit install

69 Z28 Campbell front.jpg (456353 bytes)   69 Z28 Campbell Rear.jpg (450362 bytes)

See the Car Shows this Z/28 has been to:

The Forty Second Palo Alto Concours d`Elagance at Stanford University Sunday, June 22,2008

See owner of 1969 Z/28 John Campbell at the Concours

Concours car show 2008 Campbell Z28 00.JPG (1747603 bytes)


The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY, JUNE 24, 2007

Car Crazy 12th Annual Car Show & BBQ 2007 AMS Camaro Car Crazy Show 2007  BBQ 00.jpg (1809768 bytes)


Z28 Seats Campbell 02.JPG (452547 bytes)    Z28 Seats Campbell 01.JPG (457659 bytes)   69 Z28 Campbell Doorpanel00.JPG (887410 bytes)

See the project in 07 we are working on
with help from

Auto Metal Svc.com
is painting the car with ppg materials

for John Campbell owner of the 1969 Camaro Z /28

The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams
and using the Kits and Trim parts supplied by
StevesCamaroParts.com




HEADLINER - Prep and install Work
when we removed the old oem headliner material
we found , the Bows  and the old nasty pad needed to be replaced
customer purchased new bows to replace the old rusty parts and old pad that Jon at Auto Metal Svc removed.

Z2801.JPG (658876 bytes)   Z2802.JPG (271413 bytes)   Z28 Roof00.JPG (811139 bytes)

see the new metal surface after Jon at auto metal did the dirty work removing the old roof pad
this took many hours cleaning the rust and spraying the new sealer



  Z28 Roof Campbell 02.JPG (325728 bytes)    Z28 Roof Cambell 01.JPG (892126 bytes)
next new pad is glued to the roof sections and the quarters

69 Z28 Campbell Headliner00.jpg (336450 bytes)   69 Z28 Campbell Headliner04.jpg (475371 bytes)

Finished Headiner

Parts are cleaned with acid and coated with Sem Rust Shield

Z28 Campbell parts01.JPG (264939 bytes)     Z28 Campbell parts03.JPG (306373 bytes)     Z28 Campbell parts04.JPG (285797 bytes)     Z28 Campbell parts05.JPG (242410 bytes)     Z28 Campbell parts06.JPG (312190 bytes)

Front bucket seats look great! with the
PUI Covers and American Cushion foam installed


Z28 Campbell Front Seats00.JPG (3110033 bytes)     Z28 Campbell Front Seats02.JPG (3377044 bytes)


See the old rusty seat frames we restored start to finish
Z28 Seats Cambell 00.JPG (1120377 bytes)

frames are washed in acid then the broken oem springs were mig welded by Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and jute felt are then installed

  
Z28 Seats Cambell 01.JPG (871844 bytes)     Z28 Seats Cambell 02.JPG (887209 bytes)     Z28 Seats Cambell 03.JPG (881983 bytes)     Z28 Seats Cambell 04.JPG (909831 bytes)  

Next we install the PUI seat kit and foam pad American Cushions,  from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !



Rear seat back rest frame and pad restore pictures

Z28 campbell Rear Backrest Seat00.JPG (5218935 bytes)     Z28 campbell Rear Backrest Seat02.JPG (3164663 bytes)
 
WOW! we had to STOP! 


the PUI seat covers have come unsealed on the pleat sections, this looks very bad for the customer that has a completion date

Z28 Campbell  PUI Blem 00.JPG (3903398 bytes)   PUISeat blemZ2801.JPG (1452813 bytes) PUISeat blemZ28 00.JPG (887579 bytes)

the front bucket seat kit installed looks nice big thick heat sealed pleats like the original
the rear set is thin and pleats are not heat sealed evenly and the covers are doing a popcorn process as each seam lifts


DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips


Z28 Doorpanels 04.JPG (1533845 bytes)      Z28 Doorpanels 02.JPG (1445037 bytes)   Z28 Doorpanels 05.JPG (1440024 bytes)   Z28 Doorpanels 06.JPG (1383649 bytes)

See the pictures of the Camaro Standard Door Panels get the new materials intergreated using the OEM Steel upper sections

See the finished drivers standard Z/28 Doorpanel up the page

1st  you have to use a angled tool to bend the original staples OSBORNE TOOL #120 1/2
  
You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand
this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit.
After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol)
then use a light acid that wiil remove the surface rust  (Metal Prep)
then spray lite coat of sealer like (Sem Rust Shield)
You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks

Next  apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section

Adding the foam pad that the aftermarket company did not include with the kit
You have to hand cut the 1/4 inch foam to size with angle the cut  to edges


New Z/270 Silver Z28 Camar for Chris Patane

Z28 70 Camaro Chris Patane 000.jpg (1905299 bytes)   Z28 70 Camaro Chris Patane 001.jpg (3716607 bytes)    
Z28 70 Camaro Chris Patane 004.JPG (234520 bytes)

Headliner will be installed with pics showing as we remove the OEM headliner and replce the seat covers!


Want your Z/28 interior restored so you can enter in a Concours or local Car Show?
  find your interior kit on the net

Also we do basic upholstery labor to install aftermarket kits, seat repairs for the working car owner!





 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website!

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  6505728899@onlinefax.att.com
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

 
See the new!  www.mrstitch.net website we are working on with new info for 2021



 


Amp Covers

AirCraft
Alfa Romeo
Batcycle
Bar Stools
BBQ covers
Boats
BMW
Car Covers
Car Masks
Cadillac
Camaro
CHAIRS
Chevy 55 56 57
Comcast
Console Pads
Corvette
Chevelle Upholstery
427 COBRA
Datsun 240 Z
Ferrari
Fiat Tops
Firebird
FORD
GTO
Headliners
Honda
Mazda
Mercedes
58 METRO
MGTD
Monte Carlo
MOPAR
Motorcycles
MrStitch Top Repairs
MrStitch Tool Cart
Mr76Vette
Mustang 2+2
Mustang Tops
2004 Nissan 350z
NOVA
Photos
Patterns
Police Svc
Porsche
Kits Info
LEXUS
Logos Decals Lables sewn
Malibu SS
Shop Chairs
Triumph Tops
72 Vette Top
67 Vette
68 Vette
69 GMCTruck
57 T-Bird
57 VW Bug
93  Dodge Viper
911 Targa
Seat Repairs/Mods
StarskyHutch
Toyota Tops
Truck Seats
Vintage Vehicles
Volvo
Wanted
Z/28 Camaro
WindScreens

 

MrStitch
is a
 Authorized  
Robbins Top Installer
 

  RobbinsLogotop.jpg (23250 bytes)
SEMA logo.gif (6007 bytes) MrStitch 
is a Authorized Top
 Installer Installer for
 EZ-ON Top
EZ ON Auto Tops
World Uupholstery
Worlduph.com

Vics Upholstery
www.topsonline.com
Mrnew yellow.gif (15347 bytes)
MrStitch® Designs and materials are Made in the USA
International Championship Auto Show Winner / Rod and Custom
 See !the MrStitch 1966 Batcycle Project  George Barris approved! 

Mr. Barris started it all ! creating new patterns and designs www.barris.com

MrStitch.com  is not a Politcal website

MrStitch® is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com text and images must be approved by MrStitch!
 MrStitch text and images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 

MrStitch ®   mr scissors.gif (17471 bytes) Auto Upholstery Svc

Open Weekdays - 9am to 4pm 

Saturdays - 10am to1pm

Shop Location -  77 East  21st Ave. San Mateo CA. USA 94403
Call us at the Shop!  650 572-8818   Fax  650 572-8818
Contact Us By E-MAIL mrstitch@mrstitch.com
 credit-cards.gif (3612 bytes)

Call or Emai Call For your  Estimate or Appointment to help you!

Home AtrnMrst01.pdf News Projects E MAIL Search Contents Pictures

See the new!  www.mrstitch.net website we are working on with new info for 2021



 


Amp Covers

AirCraft
Alfa Romeo
Batcycle
Bar Stools
BBQ covers
Boats