See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
 |
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007 
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we
are working on with new info for 2020
|
MrStitch
®
|
| Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8899 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
Call or Email For your Estimate or Appointment to help you! |
|
| MrStitch Cobra Services |
| Original and kit car Upholstery created and modified |
Click on thumbnail pictures for full size view
Cobra Roll Bar WindScreens made as specified!
| See
the Red Snake 1965 Cobra Updated version Factory Five Racing Cobra |
  Owned by Mr.Mark Elchinoff |
| before and after we install the custom padded console and cut and sew import wool carpet for this updated, Cobra |
|
| see the bare metal console parts before we install the hand formed pad and import vinyl |
| Closed cell foam used to hand shape the custom made console |
 |
| the completed Console unit installed |
|
Next Task! Rear Compartment / Creating Carpet Patterns 10/08
See the Wilton Wool Black Carpet from GAHH that customer picked to get the best! hand cut to fit
for this cobra!
it is recomended that 10 yards is needed to make the run of the carpet match, since the
wilton wool is 50"wide and very unwieldy but you can get by with 8 yards if you
take the time being the puzzler.
Carpet and patten mockup to see the basic fit before installing glue and
fasteners
Next ! Front floor patterns created
mrstitch makes the hand drawn paper patterns to fit the body of the vehicle!
It will take more time to do this process AlaCart, but the finished vintage look of the
new carpet patterns make this Cobra kit car stand out like opening the door of a vintage
foreign exotic with all the tailored seams and binding
Next task ! Sew the hand rolled stayfast hidem binding that will give
this carpet assembly the style that is unique! All carpet binding lines will overlap like
shingles so you cannot see the overlaping seams! All carpet patterns are cut so the grain
is going in the same direction! This takes more time to layout the patterns but the
finished look is astonishing! when the customer sees the completed job.
see the basic carpet mockup before installing, checking out the pattern fit
,many mods still need to be done.
Aluminum sill plates and carpet snaps installed!
Cobra text Sewn in trunk to show the mrstitch flag
Cobra Tops
| We can
make custom side windows for this Cobra style Top
|
| OEM KIT
CAR Customizing by mrstitch |
Remember Ernest Hemmingway`s story the Killers Movie made in 1964 with Original
427 Cobra
John Cassavetes with Lee Marvin, Ronald Regan and Angie Dickinson
get this old movie and see! the original cobra in action!!
See the Custom Shop Chair with HEMI Logo
we made for the Tommy Gun Racing Team
COBRA WEB LINKS
Get your Built-to-order COBRA Roadster Replica
MADE FOR YOU NOW! at these websites
SUPER CUSTOM Factory Five Racing Kit Cars
www.factoryfive.com
www.hdrcoupe.com
www.cobracountry.com/pegasus/
www.cobra.com/mfrs.html
www.kitcars.com
See the MGTD
Custom
Car Tops
and side windows we made for this Kit Car
Want to add your Cobra Car Company Links to this Page?
Send MrStitch your company Web Info
COBRA Rider Counter
Since 3/19/03
|
MrStitch is a Authorized Robbins Top Installer  |
 |
MrStitch is a Authorized Top Installer Installer for EZ-ON Top EZ ON Auto Tops World Uupholstery Worlduph.com Vics Upholstery www.topsonline.com |
 |
| MrStitch® Designs and materials are Made in the USA | |||
|
International Championship Auto Show Winner / Rod and Custom See !the MrStitch 1966 Batcycle Project George Barris approved! Mr. Barris started it all ! creating new patterns and designs www.barris.com |
|||
MrStitch®
is protected by the USA Patent and Trademark Office ! Any use of mrstitch.com
text and images must be approved by MrStitch!
MrStitch text and images on the web created and shown is a registered Service
Trademark.
Copyright©1986-2016 MR.STITCH All rights reserved.
|
MrStitch is a Authorized Robbins Top Installer  |
 |
MrStitch is a Authorized Top Installer Installer for EZ-ON Top EZ ON Auto Tops World Uupholstery Worlduph.com Vics Upholstery www.topsonline.com |
 |
| MrStitch® Designs and materials are Made in the USA | |||
|
International Championship
Auto Show Winner / Rod and Custom See !the MrStitch 1966 Batcycle Project George Barris approved! Mr. Barris started it all ! creating new patterns and designs www.barris.com |
|||
MrStitch.com is not a Politcal website!
MrStitch® is
protected by the USA Patent and Trademark Office ! Any use of mrstitch.com
text and images must be approved by MrStitch!
MrStitch text and images on the web created and shown is a registered
Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.
See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we
are working on with new info for 2020
See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we
are working on with new info for 2020
|
MrStitch is a Authorized Robbins Top Installer |
|
MrStitch is a Authorized Top Installer Installer for EZ-ON Top EZ ON Auto Tops World Uupholstery Worlduph.com Vics Upholstery www.topsonline.com |
|
| MrStitch® Designs and materials are Made in the USA | |||
|
International Championship Auto Show Winner / Rod and Custom See !the MrStitch 1966 Batcycle Project George Barris approved! Mr. Barris started it all ! creating new patterns and designs www.barris.com |
|||
MrStitch® is
protected by the USA Patent and Trademark Office ! Any use of mrstitch.com
text and images must be approved by MrStitch!
MrStitch text and images on the web created and shown is a registered
Service and Trademark.
Copyright©1986-2020 MR.STITCH All rights reserved.
See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
|
MrStitch is a Authorized Robbins Top Installer |
|
MrStitch is a Authorized Top Installer Installer for EZ-ON Top EZ ON Auto Tops World Uupholstery Worlduph.com Vics Upholstery www.topsonline.com |
|
| MrStitch® Designs and materials are Made in the USA | |||
|
International Championship Auto Show Winner / Rod and Custom See !the MrStitch 1966 Batcycle Project George Barris approved! Mr. Barris started it all ! creating new patterns and designs www.barris.com |
|||
MrStitch.com is not a Politcal website!
MrStitch® is
protected by the USA Patent and Trademark Office ! Any use of mrstitch.com
text and images must be approved by MrStitch!
MrStitch text and
images on the web created and shown is a registered Service and Trademark.
Copyright©1986-2021 MR.STITCH All rights reserved.
See the new! www.mrstitch.net website we are working on with new info for 2024
| |||||||||||||
|
|
See the new! www.mrstitch.net website we are working on with new info for 2022
| |||||||||||||
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 650 572-8818 |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new! www.mrstitch.net website we are working on with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on
with new info for 2021
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
|
Open Weekdays - 9am to 4pm |
Saturdays - 10am to1pm |
| Shop Location - 77 East 21st Ave. San Mateo CA. USA 94403 | |
| Call us at the Shop! 650 572-8818 | Fax 6505728899@onlinefax.att.com |
| Contact Us By E-MAIL | mrstitch@mrstitch.com |
|
|
|
|
Call or Emai Call For your Estimate or Appointment to help you! |
|
See the new!
www.mrstitch.net website we are working on with new info for 2020
New!
MrStitch Z/28 OEM Upholstery Kit install
See the Car Shows this Z/28 has been to:
The Forty
Second Palo Alto Concours d`Elagance at Stanford University
Sunday, June 22,2008
See owner of 1969 Z/28 John Campbell at the Concours
The 41st annual Palo Alto Concours d'Elegance
www.paconcours.com/ SUNDAY,
JUNE 24, 2007
Car Crazy 12th Annual Car Show & BBQ 2007
| See the project in 07 we are working on |
|
with help
from Auto Metal Svc.com is painting the car with ppg materials for John Campbell owner of the 1969 Camaro Z /28 The owner of this mean green 1969 OEM Z /28 is doing a complete restoration using the specs from vintage GM diagrams and using the Kits and Trim parts supplied by StevesCamaroParts.com |
HEADLINER - Prep
and install Work
when
we removed the old oem headliner material
we found , the Bows and the
old nasty pad needed to be replaced
customer purchased new bows to replace
the old rusty parts and old pad that Jon at Auto Metal Svc removed.
see the new metal surface after Jon at auto metal did the dirty work
removing the old roof pad
this took many hours cleaning the rust and spraying
the new sealer
next new pad is glued to the roof sections and the quarters
Finished Headiner
Parts are cleaned with acid and coated with Sem Rust
Shield
Front bucket seats look great! with the
PUI Covers and
American Cushion foam installed
See the old rusty seat frames we restored start to finish
frames are washed in acid then the broken oem springs were mig welded by
Paul at Auto Metal
Sem Rust Shield is applied to frames and new burlap and
jute felt are then installed
Next we install the PUI seat kit and foam pad American Cushions,
from StevesCamaroParts.com
this assembly from Steves looks great right out of the box !
Rear seat back rest frame and pad restore pictures
WOW! we had to STOP!
the PUI seat
covers have come unsealed on the pleat sections, this looks very bad for the
customer that has a completion date
the front bucket seat kit installed looks nice big thick heat sealed
pleats like the original
the rear set is thin and pleats are not heat sealed
evenly and the covers are doing a popcorn process as each seam lifts
DOOR PANEL Aftermarket Kit for Z/28 Camaro
Install DIY Project Tips
See the pictures of the Camaro Standard Door Panels get the new materials
intergreated using the OEM Steel upper sections
See the finished drivers
standard Z/28 Doorpanel up the page
|
1st you have to use a
angled tool to bend the original staples OSBORNE TOOL #120 1/2 You have remove the original upper panel and reset the pressed daggard holes using a angled set of pliers when doing by hand this means you have to turn the tips up so the pre punched holes will puncture the new panels giving a tight fit. After you get this removed you have to clean the upper metal panels with Solvent to remove the glue (we use Kent Acrysol) then use a light acid that wiil remove the surface rust (Metal Prep) then spray lite coat of sealer like (Sem Rust Shield) You can the align the upper panel to the aftermarket assembly doorpanel, using the notches and marks Next apply glue to the doorpanel base board and the metal , using a heavy weight hammer to stamp the metal to into the panel, by hand doing strokes like a roman makes his sword, hard and even to get a smooth feel of the new hand sealed upper section Adding the foam pad that the aftermarket company did not include with the kit You have to hand cut the 1/4 inch foam to size with angle the cut to edges |
New Z/270 Silver Z28 Camar for Chris Patane
Headliner will be installed with pics showing as we remove the OEM
headliner and replce the seat covers!
Want your Z/28 interior restored so you can enter in a Concours or local Car
Show?
find your interior kit on the net
Also we do basic upholstery labor to install aftermarket kits, seat repairs for
the working car owner!
|
MrStitch ® |
